Main Page

From IH8MUD Wiki

WELCOME to the new IH8MUD Wiki project!

Consult the User's Guide for information on using the wiki software.

If you want to contribute and don't know how to use Wiki software (like many of us), and have not read the user guide...the quick start method to include your new 'item' to your page is: [[FJ60]]. NOTE: add any new items without content as non-linked for now....makes more sense as things build, and to be sure information is correct - much like has been done with non-link items below.

1 Trivia
2 Models
3 Gasoline (Petrol) Engines
4 Diesel Engines
5 Manual Transmissions
6 Automatic Transmissions
7 Terms/Language
8 Related Links

Trivia

Winches
- Warn Bellevue 5287

Axle Information
- Birfields
  68-75 Cruiser drum brake birfields, coarse 6-spline outers
  76-78 Cruiser birfields - slightly smaller bell and slightly longer stub shaft than later Cruiser and minitruck, fine spline
  01/79-01/90 Cruiser birfields (?J40/45/47/55/56/60/61/62) = Minitruck birfields(79-90 mini/hilux/surf)
  cast Marfields = Newfields = Longfields = minitruck (bell diameter and shaft length)
- Front Inner Axle Shafts
  FJ60/2 short side same as FJ40 short side ~ 17-1/4"
  FJ60/2 long side same as minitruck long side (79-85) ~ 31-7/16"
  Minitruck short side fine spline ~ 15-5/16"
  FJ40/55 long side fine spline (68-83) ~ 29-1/8"
  P/N for inner axle seal = Chicago Rawhide #12810 (NAPA)
- Rear Axle Shafts
  FJ60/2 short side same as FJ40 short side
  FJ60/2 long side is exclusive.
- Driveshafts
  FJ60 thru 1984 patterns match 4-speed FJ40 patterns
  84 Minitruck front CV shaft pattern (CV end) matches 4-speed 40 pattern (opposite end does not)
- Differentials/Housings
  Speedie Sleeve for pinion flanges: p/n 99147, list = $33.99 (size = 1.49 - 1.496)
  90311-38047 Pinion Seal
  90341-18021 Plug w/magnet $1.74/ea
  90430-18008 Gasket, tranny/transfer $1.00/ea
  12157-10010 Gasket, diff plug $0.77/ea
  41361-60041 Washer, Differential - thickest factory side washer for lunchbox locker installs
- Shocks
  E5TZ-18183-A 88 F250 Ford part number for taller replacement front shock towers
- Brakes
  Brakes/Steering rear disc brake hoses - NAPA 38149 or Raybestos BH38149
  22-1/2" long frame-to-axle brake hose for SOA - NAPA 38009
  front axle outer hoses (skips backing plate) - NAPA 38881 (longer) or 38878 (shorter)
- Steering
  PS conversion column support bearing: Kilian F-350-89 flanged bearing. ID is 19.1 mm, OD is 34.9 mm. (around $6.00)
- Engine
  Carburetors All USA 2F carbs are the interchangeable 01/79-07/80
  All USA 2F carbs are interchangeable 08/80-07/87

         NOTE: prior to these dates you had a mix of Fed spec, Cali spec, high altitude, etc...anything goes...
         NOTE: quite a few 81's and 82's do not have the idle up feature for A/C, missing the diaphragm 
               and also the linkage on the front side of the primary throttle shaft.

- Exhaust SBC exhaust crossover - order from '66 1/2 ton Chevy w/283
  Cooling Chevy 350 to stock Cruiser radiator - upper hose is Gates 2016, lower hose is Gates 20573
  Transfer Case 81-84 FJ60 w/H42 4-speed - 1.990:1
  85-87 FJ60 w/H42 4-speed - 2.276:1
  87-90 FJ60 w/A440F Automatic - 2.276:1

         NOTE: exceptions have been found in split-case ratios. Bearing - 3-speed transfer/4-speed tranny adapter
         Manufacturer: BCA
         Part Number: RW114R (cross: rear wheel bearing, Datsun B210, 74-82)
         Part Number: 6306-32R-2NSL - $43.15 CDN
         Note: this is like the standard 6306 except with a 32mm center

- Toyota PN # 33309-60021 ~ ROUND split tcase output flange, studs included
  Specter p/n 180-08H ~ 12" speedo cable extention, great for VSS installs
  Seal between the transmission/transfer case that allows the 90 wt to fill the transmission when it goes bad - NOK AE24931
  Rear output, where the emer brake drum resides:

         Seal - NOK AD2651E
         Speedi-Sleeve - CR (Chicago Rawhide) 99177

- Front output flange:

         Seal - NOK AH2261J
         Speedi-Sleeve - CR 99147

Wheels/Tires
- Wheels
  CORRECTION!!! 15x8 Black Rock Crawler Part number from 4 Wheel Parts Wholesalers - TEC51-5883S3.5

         3.5" is the correct backspacing, don't go messin' with the number)
         NOTE: Apparently, what used to work for some no longer does...READ THIS

Models

AK-10 1942/43?-July 10 1944 (Japan)
BJ 1951-1955 (Japan)
2x-series
- FJ2x
  FJ25 1958-1961 (US), ? (Canada), 1955-1960 (Japan)
- BJ2x
  BJ28 1956-1960 (Japan)
3x-series
- FJ35
4x-Series
- Petrol
  FJ40 1960-1983 (US), 1984 (Rest of World) | FJ43 | FJ45 SWB, LWB, and LV
- Diesel
  BJ40 | BJ41 | BJ46 | HJ47 | BJ42 | BJ43 | BJ45 | BJ44
5x-Series
FJ55 1968-1980 (US) | BJ56
6x-Series
- Petrol
  FJ60 60-series wagon, 1980-1987 (US) | FJ62 62-series wagon, 1988-1990 (US) | FJ61 | FJ62V
- Diesel
  BJ60 | BJ61V | HJ60V | HJ61V
7x-Series
- BJ70 | BJ70V | BJ71V | BJ73V | BJ74V | PZJ70 | RJ70 | PZJ70V | PZJ77V | HZJ73V | HZJ77V | HZJ70V | HZJ70 | HZJ75 | LJ70 | LJ73 | KZJ70 | KZJ73 | HDJ79 | VDJ79
8x-Series
- Petrol
  FJ80 80-series wagon, 1991-1992
  FZJ80 80-series wagon, 1993-1997
- Diesel
  HZJ80 80-series wagon, 1993-1997
  HDJ80 80-series wagon, 1991-1997
  HDJ80 80-series wagon, 1995-199? (1hdtf)
10x-Series
- Petrol
  UZJ100 100-series wagon, 1998-2007
- Diesel
  HDJ100 100-series wagon, 1998-2007
  HZJ105 105-series wagon, 1998-200?
20x-Series
- Petrol
  UZJ200 200-series wagon, 2008-present
  URJ200 200-series wagon, 2008-present
- Diesel
  VDJ200 200-series wagon, 2008-present

FJ Series
- GSJ15 FJ Cruiser, 2007-present

Gasoline (Petrol) Engines

Toyota
- Inline 4-cylinder
  20R | 22R | 22R-E
- Inline 6-cylinder
  B-type | F135 | F145 | F155 | F155 (1974) | 2F | 2F-E | 2F-ETI | 3F | 3F-E | 1FZ-F | 1FZ-FE
- V-6
  1GR-FE
- V-8
  2UZ-FE | 1UR-FE
General Motors
- V-6
  4.3
- V-8
  305 | 350

Diesel Engines

Toyota
- Inline 4-cylinder
  B | 2B | 3B | 13B-T | 1KZ | 2L | 2LT | 3L
- Inline 5-cylinder
  1PZ
- Inline 6-cylinder
  H | 2H | 12-HT | 1HD-T | 1HD-FT | 1HD-FTE | 1HZ
- V8 8-cylinder
  1VD-FTE | 1VD-FTV